Most electrical equipment components heat noticeably at the beginning and end of the failure cycle — Take advantage of Armco Infrared electrical inspection capability to locate these failing components and experience:
All electrical surveys are performed by an experienced Level 3 Certified Thermographer and NC licensed electrical engineer.
We utilize Ultrasound or ultrasonic detection to facilitate electrical inspections of both low voltage (Tracking and Arcing at 480-1kv) and high voltage (Corona Discharge at 1kv and up) equipment without opening the equipment enclosure.
Many facilities have not had the (expensive) arc-flash studies completed that would provide specifications for Personal Protective Equipment (PPE) and equipment approach boundaries. Worse, many plant personnel are unaware of or minimize the danger presented by live 480 volt switchgear.
IRISS, Inc manufactures the only re-enforced and impact tested, industrial-grade, InfraRed (IR) windows in the business. We believe that they are also the best in the business. IRISS windows are currently installed in OEM switchgear by ABB and others.
Additional Benefits of Infrared and Ultrasound Inspection Window Installation:
Safety: The risk of shock, shock related injury or electrocution is virtually eliminated for both Infrared and Ultrasound inspections.
Safety: The risk of arc-flash injury is reduced substantially and the need for PPE is reduced to that required for a closed cabinet or unexposed live components – Category 0 –
Improved Preventive Maintenance and Plant Operating Cost: IR windows and Ultrasound access ports facilitate a systematic approach to data collection: Same target, Same location, Same angle, Same distance and Same timing of inspection. Consistency in data collection leads to improved diagnostics, reduced unscheduled downtime and improved on-time product delivery.
Equipment Inspection Efficiency: The use of infrared windows has been shown to eliminate the majority of the time involved with inspections (opening panels, obtaining permits and time required for the use of PPE).
Compliance: OSHA and NFPA guideline and mandate compliance per the NFPA 70B and 70E is facilitated
Project: FedEx distribution center electrical system inspection – Charleston WVA
“Robert and I have team-up on some projects and some advanced training. He gets the details right and if he says he can do it – you will be impressed. Hopefully we will work together again soon.”
— Mark Easter, PE CEM, President at Pinnacle Engineering, LLC – Read More Client Comments